- Heat Press Or Cricut Press is Needed!
- Trimming Your Image
The paper has a transparent polymer background. However, it is recommended you trim close to your image to reduce the polymer background even more. The trim does not need to be accurate. It is recommended to trim roughly 0.5 – 1.0 inches around your image.
- Pressure Settings
To ensure that the coating has properly fused with the fabric, we recommend using maximum pressure. If this paper is applied with inadequate pressure, the transfer will not wash well.
This paper is to be peeled hot to warm. Peeling should occur no less than 5 seconds after pressing. Also if you have difficulties peeling the backing off the shirt, while the fabric is hot, gently tug on the sides of the shirt, the backing will “pop” right out. If you would like a glossy finish, peel cool or cold.
Heat Press Settings
- 360° for 25 seconds
Home Iron setting
- You cannot use a Home iron with this particular transfer paper. (Use the dark transfer paper if you only have a home iron)
- Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned.
- Letter – 8.5″ x 11″