Select Page

Heat Vinyl Adhesive

Heat Vinyl Adhesive


Heat Vinyl Adhesive is a cuttable glue on a clear see-through backing sheet. Perfect for applying textile foils and more to fabric. Cuts easily using any vinyl cutter. Adheres to cotton, uncoated polyester, cotton/poly blends.

Size of the Heat Vinyl Adhesive: 12’x12′

Foil Vinyl Adhesive is required for Foil Heat Transfers

SKU: HOTMELT Category:


Cut your design in a Reverse or Mirror Cut. Cut with the adhesive side facing upwards and plastic carrier facing down Weed/pick out/remove all excess & unwanted Place design on garment – sticky glue side will hold it in place. Press it at 300°F for 10 seconds and hot peel. Cut a piece of foil that is slightly larger than the Adhesive design. Carefully place foil over the adhesive design and make sure it is completely covered. Place a cover sheet over design and heat apply.

Temperature & Time

300°F for 10 Seconds and Cold Peel

Additional information

Weight 0.1 lbs
Dimensions 21 × 3 × 3 in
Adhesive Size

12" X 10" ($1.50), 12" x 20" ($2.75)